Wednesday, November 24, 2010

How to connect a headlight to dirt bike without battery.?

I currently own a 125cc dirt bike with kick start only for starting method. I remember the dealership installing a running headlight (When engine is running) on my 85 suzuki quad racer atv. I know its possible, I just need the blueprint of how to do this.How to connect a headlight to dirt bike without battery.?For future reference, always give year, make, engine size and model # when asking questions. We need all of that info to give an informed answer.



Some aftermarket companies offer %26quot;lighting coils%26quot; for specific bikes.

A lighting coil is attached at the flywheel and produces electricity the same way as the magneto.



There are units for quads that use a small amount of power from the CDI and amplify it to operate a headlight.

Those companies would surely have kits for bikes.

But each kit is model specific.How to connect a headlight to dirt bike without battery.?try %26quot;bikebandit.com%26quot; they might have a schematic thereHow to connect a headlight to dirt bike without battery.?most dirtbikes do not generate enough electricity to power a headlight. check out the link below for more informationHow to connect a headlight to dirt bike without battery.?The stator may not have enough output to power a headlight, it just depends...



Contact the manufacturer of the bike, or better yet go to the dealership and talk to a mechanic. If it one of those bikes from Checker Auto or something then your not going to have any fun researching that bike...How to connect a headlight to dirt bike without battery.?theres 3 ways

1 external battery-for the light only

2 dynamo from magneto-needs 2 be poweful enough though

3 dynamo from %26quot;somewhere else%26quot; u may hav seen old pushbikes with a dynamo light on the crank or rear wheels

may b an option 4ya

will need sum settin up-u can get smaller batteries these days for allsorts may be an option 2 install small battery+ 2 leads what do the minimotos run on??How to connect a headlight to dirt bike without battery.?1985 Quadracer came stock with a running headlight (no battery).

What year, make, and model is the 125 dirt bike ?
  • Homemade Duvet Cover
  • How are guinea pigs
  • How much will it cost to repair one broken headlight?

    My car's right headlight was broken today.

    (The one for long-distance lighting--high beam only.)

    The glass and bulb were broken.

    My car isToyota 1993 camary.



    Will it cost a lot to repair by a dealer?

    I am in Pittsburg, KS.



    Thanks.How much will it cost to repair one broken headlight?headlamps are not that hard to change out



    from Autozone here it is $129.99 new from Keystone



    the bulb only costs $10



    prices can vary although $600? forget it





    The assembly is only bolted in generally or held in by clips and is not that hard to change out normally. The bulb itself is a 9006 HB4, it should be locked into the back of the assembly but unlocks by turning counter clockwise, then you just need to remove the socket from it by lifting the tab that locks on the bulb then remove it. Installation is reversed of removal.



    Never touch the glass on halogen bulbs, it can easily lead to burn marks on the glass. Any plastic part is fine for handling or you can use gloves when doing the job just to make sure.How much will it cost to repair one broken headlight?we buy a ton of parts here, they fit perfectly and are cheaper that dealerHow much will it cost to repair one broken headlight?If you put your hands in your pockets that you have to pay about 70 to 80% of labor, give a called or meet some guy at any of autopart, they will tell you what. Try doityourself save a lot of money. Good luck !How much will it cost to repair one broken headlight?Fancy curved light assembly gets expensive from dealer. Toyota Camry is a popular car so a salvage yard may have assembly and bulb for $50.00- might even put it in your car for another $25.00. Aftermarket replacement noted by others also available.How much will it cost to repair one broken headlight?Somewhere between 100-600 dollars. Depends if in stock and avaliability.

    How much does it cost to get the right headlight of a car fixed?

    Ok so basically I was going too fast in the snow downhill. Long story short, I lost control of the car and hit a pole which busted the right side of the car, but mostly the headlight. To make things better, I've had my license 3 months and this was my parents car. How much would is it going to cost after insurance?

    ~Yes my parents know about this and have definitely given me a few choice words.How much does it cost to get the right headlight of a car fixed?After insurance? Look at your policy and see what the deductible is. That's your cost, the rest will be paid by the insurance company.How much does it cost to get the right headlight of a car fixed?it depends on how old your car is if it is the how entire headlight, the a couple hundred dollars, if it is just a bulb then only around 18 dollarsHow much does it cost to get the right headlight of a car fixed?If they have collision it might be covered under their insurance anyway. However since your posting I assume it's not.



    Without knowing the make and model of the car, or it's year, or how extensive the damage is, or what sort of bulbs you use... Well basically we need more info.

    How do I hide the scratch on my new headlight purchase?

    I have purchased a new headlight online. But I has been scratched when I placed it. I wonder is there any chemicals or any cheapest way to fix it.How do I hide the scratch on my new headlight purchase?chemicals will not dissolve away a scratch - a scratch is %26quot;missing material%26quot; - you can either try and find a way of filling it OR polish down the surrounding material to try and disguise the scratch.



    Is the scratch in a metal / glass / plastic part of the headlight. Do you mean a light that you fix on your head - eg: for potholing / caving, or a thing you plonk on the front of your car?



    Not really enough info to know how to guide you, even the part where you say %26quot;But I has been scratched when I placed it.%26quot; isn't especially helpful.



    MarkHow do I hide the scratch on my new headlight purchase?If you purchased it new, and it arrived with a scratch, contact the seller about getting it replaced.How do I hide the scratch on my new headlight purchase?If you did it... You are SOL.

    How much would it cost to replace a broken headlight lens?

    I drive a Pontiac G6 2007 and recently got into a small accident. Now I have a broken headlight lens; the actual light itself is fine.



    Is it possible to just get the lens replaced? (or would I have to replace the whole light assembly??)

    and around how much would it cost for my car?How much would it cost to replace a broken headlight lens?Replace the whole thing

    Go to Rock Auto.com to get a priceHow much would it cost to replace a broken headlight lens?you have to replace the whole thing look on auto zone.comHow much would it cost to replace a broken headlight lens?you have to buy the whole assembly... its gunna be pricey i work at kragen and our price range would be around $200. i might be exagerating a bit just because its a newer vehicle. ask an associate if there are any local manufacturers sometimes they can get u a deal by selling u a part that the store gets at wholesale price and then they mark it up to sell to u but it still ends up being less than the traditional manufacturer used by the company and also faster to get as these are not usually stocking items.... not all places have the same prices or local vendors that are also manufacturers

    How do I replace a headlight bulb on a 1986 Mercedes 300E?

    As specific as possible. Links to sets of step-by-step instructions would also be great. I guess what I'm asking is, how exactly do I disassemble the headlight assembly enough that I can replace the light but not so much that I'm breaking something? It's more complicated (Is that a tiny windshield wiper on the headlight?) than most cars.How do I replace a headlight bulb on a 1986 Mercedes 300E?You don't have to disassemble the headlamp from the front so the headlamp wiper system does not matter.



    Are you in North America or elsewhere in the world? The reason I ask is because there are 2 different headlamp systems and North America has their own version.

    Regardless, they are pretty much the same as far as replacing the H/L bulb. On the rear of the headlamp there will be a cover, remove this. There will either be a retaining clip or ring around the bulb as well as an an electrical connection on the back of the bulb. Remove both of those as well.

    You can now remove the bulb from the back of the headlamp housing. As mentioned above, be careful not to touch the glass of the new bulb. This is because the oil that is naturally on your skin stays on the glass and when you turn the headlamp on, the heat from the halogen bulb boils the oil and can easily break the glass.

    Put the new bulb in and reverse the removal instructions.How do I replace a headlight bulb on a 1986 Mercedes 300E?first of do not Touch the new bulb with your fingers, use a rag to handle the glass!! Open the bonnet %26amp; you will see behind the headlight a round cap that if you turn will come off, you will then be able to access the bulb holder %26amp; it should pull out from the plug. If you have an owners manual it has detailed step by step instructions If not try to get a manual from a wrecker if you don't have one it is invaluable for routine maintenance jobs like bulbs etc. Good luck
  • funny myspace
  • hair spray
  • How much will it cost to fix my headlight?

    My car is a 2003 Chevy Cavalier LS. When I accidently hit my neighbor's car (who didn't seem to care), my right headlight got knocked out of place. Northing is cracked or broken, just needs to get realigned. I can see with it fine. Thanks!How much will it cost to fix my headlight?About $50 at a body shop if all it needs is realigning. There are about three alignment screws at the perimeter of the headlight holding the lens to the headlight frame. These adjust the aim of the lights.



    However, if you have actually cracked the headlight mounting frame behind the clear lens, you're looking at a lot more.

    You should be able to get a quick, free estimate at about any body shop.How much will it cost to fix my headlight?a lotHow much will it cost to fix my headlight?Have a friend align it for you at night in a garage. Most of these align with a screwdriver or torx head bit. Not hard...How much will it cost to fix my headlight?Probaly 200 dolars.How much will it cost to fix my headlight?its gonna depend on where u go, some repair shops charge more for maintinence then others, and price parts diffrent too, the best one ive heard of is Advanced Auto Parts, but i dont know what they have in stores.How much will it cost to fix my headlight?A dealer shop would charge you about $180.00/Hr here in Napa Ca.

    Try a body shop, they should be cheaper.



    Good LuckHow much will it cost to fix my headlight?I agree with Jay S. Go 2 sum body repair shops %26amp; get quotes 1st thou. U'll find that sum places charge more than others, but thats bizness 4 u.How much will it cost to fix my headlight?pretty easy to do yourself with a torx head or phillips head screw driver. go to your local auto parts house and get them to find the proper size driver (some places like autozone will even have loaner tools with a deposit).



    might have to remove some trim to access the two alignment screws, usually one on top or bottom to adjust up/down and one on the side to adjust side to side.



    pull up to either a wall or a garage door (leaving about 10-12 feet), find what height the center of the one is that isn't screwed up, and make a horizontal mark on the wall/garage door. measure from center of headlight to center of the other headlight on the car, then measure that far from the center of the correct headlight shining on the wall/garage door ... and put a vertical mark.



    then start adjusting up/down and right/left until the center of the beam lines up with the marks on the wall/garage door...



    that will get you pretty close.



    you might be able to tap with the heal of your hand on the bulb and it might pop back into the proper location. these are spring loaded usually and might just be out of whack...How much will it cost to fix my headlight?well, u can call around,and get some estimates, or u can call the dealer ship.

    How can I clean the inside of the headlight lenses on a 1997 dodge caravan?

    Apparently, the headlight assembly was not sealed properly and over time, got condensation inside. Now when I stick a screwdriver and paper towel through the light bulb hole and try to wipe it off, nothing comes clean. The assembly does not come apart and they cost $235 each to replace.How can I clean the inside of the headlight lenses on a 1997 dodge caravan?you can't. The seal on the headlight assembly is bad. There are some web sites that sell the light for a cheaper price. I suppose the price you list is from the dealer.How can I clean the inside of the headlight lenses on a 1997 dodge caravan?Put a couple of tablespoons of baking soda-the stuff people use to keep their refrigerator from smelling bad-into about 2 cups of water and stir it until it dissolves. Remove the headlight assemblies from the van and pour the liquid into the hole where the bulb goes. Swish it around inside for a few minutes and it should clear up the haze. Fords have the same problem and this worked on my '90 Ranger. To keep it from happening again, take a tube of clear silicon gasket maker and run a small bead of it around where the clear lens mates to the base of the headlight and smooth it out with your finger. Wear latex gloves if you want to keep the gasket maker off of your fingers.



    Total cost-about 4 bucks for the silicon. You've probably already got the baking soda in your kitchen cupboard.



    Just be sure to use baking soda-not baking powder.



    When you're done, you can also pour the liquid over your battery terminals to get rid of any corrosion on them since you'll have the hood open to get the headlights out anyway.



    Hope this helps.How can I clean the inside of the headlight lenses on a 1997 dodge caravan?you have to break the seal on those to clean the inside of them, i have done a few before but they are hard to get to seal back up,it can be done,and its still a lot cheaper than buying new ones,they make a sealant that will work as good as the original sealant did if not better,then you can clean and buff those off,one thing to remember when taking those apart,be careful don't pry on the lens at any time let it come off by its self if you pry on it without all the sealant being loose or removed it will break,i broke the first one i tried to remove,be patient and they will come off,good luck with it.How can I clean the inside of the headlight lenses on a 1997 dodge caravan?You could use some CLR cleaner and water. Just pour some CLR mixed with water inside the whole assembly of the headlight, swirl it around for a few mins and then let it just sit there with the mixture still in it for a few more mins and then rinse out the assembly with water and let it dry. That should be able to clean them.How can I clean the inside of the headlight lenses on a 1997 dodge caravan?Ive taken them apart and resealed them , but most people say you must replace the module , but them again I know how to do it and well 30 + years experience, best bet shop on line for after market OEM type 1/4 the price replace the whole unit or I repair it for 30.00 dollarsHow can I clean the inside of the headlight lenses on a 1997 dodge caravan?you can't.. replace itHow can I clean the inside of the headlight lenses on a 1997 dodge caravan?good question same thing has happened to me in a 97 ford contour

    How much does it cost to repair the glass over a headlight?

    My 1999 Pontiac Bonneville was recently backed in to while parked. The driver's side headlight was hit. The headlights themselves are all working properly, but I was wondering how much it will cost to get the glass replaced over it. I'm a poor college student so hopefully, not very much!

    Thank you!How much does it cost to repair the glass over a headlight?YOU CAN'T REPLACE JUST THE GLASS, YOU HAVE TO REPLACE THE WHOLE ASSEMBLY. IF YOU ARE IN A LARGE CITY CHECK YOUR YELLOW PAGES FOR AN AFTERMARKET PARTS STORE. THERE PARTS ARE NEW BUT CHEAP , EVEN AT THAT YOU ARE LOOKING AT ABOUT 75 TO 100 DOLLARS PLUS LABOR TO INSTALL.How much does it cost to repair the glass over a headlight?I paid about $100 for a new villager head light off the internet. I don't know what part of the country you're from, but query www.car-part.com and see if they can help you. Its a used parts place and they have parts all over the us.How much does it cost to repair the glass over a headlight?you have to buy anew headlamp you cannot do it any other way. you can buy new oem. used ore after market . one is as good as the other .used is cheeper and sometimes after market is cheeper yet.

    How do you remove a headlight on a 93 honda accord?

    I have a 1993 Honda Accord, and I cannot twist the socket around the headlight bulb to get the bulb out. It seems to be sealed on. So I was just going to remove the whole headlight, and go from there. Is there an easy way to do this?How do you remove a headlight on a 93 honda accord?there is an outer retaining ring on that headlight bulb that needs to be turned. you don't turn the bulb! you need to disconnect the connector from the bulb then look at the back of the headlight. you'll see a plastic ring that has four depressions that goes around the bulb. you need to turn that ring counter-clockwise to remove it. it only has to be turned about 1/8 turn to release the ring. you may be able to get two hands in to turn the ring. on some you have to pull out the 'snorkel' tube from in front of the battery to get access to the bulb on the passenger side.



    if you can't move the ring (it will be tight!) try to use a hair dryer to heat up the ring. you don't want to melt it but it may expand if you heat it with a blow dryer. I don't think you want to use penetrating oil as you'll never be able to grip the ring after you soak it.. Perhaps tapping on the ring with a screwdriver and hammer may loosen it if all else fails.



    do not turn the bulb! if you are able to you'll destroy the headlamp housing or your hand whichever gives way first.



    to remove the headlight assembly you have to take the front bumper off. its to your benefit to do it in the car.



    hope that helpsHow do you remove a headlight on a 93 honda accord?Reach in and grab the end of the bulb and turn it counterclockwise. It will come out. don't try and replace the whole headlight. No need to. If you can't get it, any jiffy lube will replace it for you for 15.00 bucks.How do you remove a headlight on a 93 honda accord?the ones on the top are easy but the bolts on the bottom arent u have to take the f bumper off in order to get to the bottom ones.its easy if u have patience.

    How do I change the headlight in a 2000 Honda Civic?

    I am trying to change the headlight on my Civic and I can't figure out how to disconnect the old bulb. I have taken off the rubber sleeve and unhooked the light from the outlet. The bulb is still attached to the headlight.How do I change the headlight in a 2000 Honda Civic?you have to rotate the whole plastic piece and it will come out, from there when its out the bulb will come loose easilyHow do I change the headlight in a 2000 Honda Civic?Yea, what Adam said. Remember not to touch the bulb with your fingers. The oil from your hands will damage the thin glass on the bulb.
  • print out the mistakes
  • celebrity hair
  • How do i replace a headlight bulb in my 2006 dodge grand caravan?

    Hi. My wife called to say her driver side headlight is not working. Two part question: how do i get to the existing bulb (I'm assuming I have to unmount the headlight enclosure and pull it out to unscrew the bad bulb)? And, is the bulb readily available at a PEP Boys, Strauss? Thanks!How do i replace a headlight bulb in my 2006 dodge grand caravan?Bulb is readily available at any auto parts store.



    Open the hood. Right above the headlight assembly (jug) are 3 or 4 phillips head screws. Back them out until you can pull the screws out. Pull the headlight assembly out and change out the bulb, making sure you don't touch the glass surface. You may need to press in a small tab on the connector to disengage the lock. There may also be a lock ring that holds the bulb in the assembly.



    Reverce procedure to reinstall. No need to realign headlight.How do i replace a headlight bulb in my 2006 dodge grand caravan?thats really easy to do. If you have your owners manuel just look it up under bulb replacement... it gives you the code that you need for the bulb (that you can even buy at k-mart) so im sure pep boys has it. It will also give you a diagram of how to do it with instructions. all you do is unscrew the three screws and it pops right out

    How do I get rid of moisture buildup inside my headlight?

    I have a newer Ford Ranger with clear headlight lenses, and after 3 years, one of them has a lot of moisture built up inside it, enough that its really noticable. How do I get rid of this without having to get new headlights?How do I get rid of moisture buildup inside my headlight?you can break the seal on them and re-seal them,and once they are cleaned and re-sealed they should do ok ,but use the right kind of sealant on them,i have did a few that way not many but all turned out ok,some of the newer ones you cant re-seal ,so make sure yours is one of the ones that will come apart,good luck hope this helps.How do I get rid of moisture buildup inside my headlight?take out the hedlight assembly take out the bulb and put it in a room with the heat on facing the opening down to allow the moisture to escape. or just hold a hair drier up to the opening for the bulb only halfway to allow the air to %26quot;circle inside%26quot; the heat and air flow should dry it up. sadly if there is moisture inside you probably have a cracked lense and should replace itHow do I get rid of moisture buildup inside my headlight?headlight is leaking. need to eliminate water getting in. u can take some silicone caulk and smear it over the top seam to seal light. in the meantime, stick a piece of fishtank tubing in light and suck out the puddle u have in light. the other option is to drill a 1/4 inch hole in the lowest part of light to let water drain out on its own. i have done both with moderate success. i actually had better success with drilling the hole than with sealing the light. good luck.How do I get rid of moisture buildup inside my headlight?Dodge is correct, I'd only add a bit of silica beads to soak up future moisture.How do I get rid of moisture buildup inside my headlight?If it's a Ford, then you should just be able to easily pop the headlight out, wipe it clean, and then, as the person above me said, check the seals. Hayne's manuals can help alot with that. Usually get them at Autozone or something of the like.



    Other than that, the only other answer is it's a Ford, they've already circled the problem. HahaHow do I get rid of moisture buildup inside my headlight?took the ones off the dodge and resealed them with gorilla glue , make sure the lenses come off before you start , the gorilla glue did the job for the dodge ram , pass a bead on both sides, it will expand

    How do I know if my motorbike headlight is uk or european?

    Just brought a replacement headlight for my imported motorbike and the new one is supposed to be for uk use but looks identical to the original italian one? Does anyone know how to tell if its ok?How do I know if my motorbike headlight is uk or european?There is a alphanumeric specification on the lens (which should be the only part that needs replacing except you have to buy the whole unit just to get the lens), unfortunately I cannot remember that spec at the moment.How do I know if my motorbike headlight is uk or european?If you bought in the UK it will be the UK version. The outside shells will be the same

    Dan USAHow do I know if my motorbike headlight is uk or european?the only difrence would be the angle each light spreads its beam as in Italy they ride on the wrong side of the road

    How do I adjust a newly replaced headlight so that it shines on the road and not up in the trees?

    I have a 1998 Dodge Grand Caravan for which I recently replaced a burned out head light for the driver's side lens. I did not realize that there was any adjusting required until I had to use the lights. The headlight now shines high and a little to the right. How do I go about fixing the problem?



    Thanks.How do I adjust a newly replaced headlight so that it shines on the road and not up in the trees?You should NOT have to do ANY adjustments, make sure you installed it right, they have three grooves were you insert them and then twist, sometimes you only inser two the correct way and it looks like is correct but NOT, if this is not your case, look around the plastic casing on the headlight you should have 2 or 3 screws for adjustment, they are not flat head nor Phillip, they are like a star shape (i don't remember the name for those screws, but i think they are %26quot;star%26quot;), adjust them as need it, but if you only take an old one and replace it for a new one i don;t think you have to do this, but GOOD LUCK!!!How do I adjust a newly replaced headlight so that it shines on the road and not up in the trees?It simply has adjusting screws on it..the screws that go through the little metal frame that holds the lamp in you adjust them in or out as you need..drive your car inside a garage next to a clear wall and turn the lights on..if no garage a wall on the outside of your house, brick wall etc will work...if the light is shining high the bottom 2 screws need to go in further..and the top two out...adjust till you see the beam at the right height on the wall....it is then needing adjusting back o the left for it is shining to the right too...means the left side screws need to go in more a little and the and the right ones back out..you will have to piddle with it a little back and forth due to heighth and side to side..but it is simple...look at the walls you are using to see the adjustmentHow do I adjust a newly replaced headlight so that it shines on the road and not up in the trees?You replaced just the bulb? Maybe it isnt seated correctly. Most cars do have headlight adjustments but unless you hit something with that part of the car it shouldnt ever need that much of an adjustment. Look around under the hood in the vicinity of the mal-adjusted light (try re-seating, removing and replacing the bulb first being careful not to touch the glass of the bulb because the oils on your skin can immediately ruin the bulb). Somewhere there are adjustments, I guaranty itHow do I adjust a newly replaced headlight so that it shines on the road and not up in the trees?There should be two adjusting screws on the head light. One, on top, will determine the height of the beam and the other on the side will handle the left/right position. Some of these are torx head screws so you may need to get a set of torx head drivers.



    good luck.How do I adjust a newly replaced headlight so that it shines on the road and not up in the trees?do you have a garage. park close to the garage about 3or 4 feet away. then adjust your head light with the one that is shinning on the garage. okHow do I adjust a newly replaced headlight so that it shines on the road and not up in the trees?Park your car 20 feet from a wall.



    Adjust the height of light to be 2 feet from the ground.

    How effective are aftermarket headlight sealers in deflecting UV rays?

    After market headlight cleaning kits remove the factory UV coating on the headlight lens. These cleaning kits sometimes offer a sealer to replace the damaged coating but do they work?How effective are aftermarket headlight sealers in deflecting UV rays?They last anywhere from a month to three months before they begin to peel and yellow.

    I do not know of anyone of them that actually advertises UV protection in their sealers. I doubt that polyurethane or acrylic floor finish has UV protection.

    The water based acrylic will not yellow as quickly or as darkly as the oil based polyurethane sealers but it is not as durable.

    Best to avoid using any cleaning method that will damage or remove the factory seal.How effective are aftermarket headlight sealers in deflecting UV rays?For about a year, then they need to be redone. They get cloudy/dull due to sandblasting effect from road grime, thus the need to redo.How effective are aftermarket headlight sealers in deflecting UV rays?They are either water base or oil base

    Neither have any UV protective qualties.
  • what is your best money saving idea
  • domain name registration
  • Why cannot I switch or close the headlight when driving my Corolla?

    Before I start the engine, eveything is OK, I could switch the headlight to high beam or close it. But after I start the engine, the light cannot be switched or closed. It keeps the same light no matter how I switch it.

    Besides, the light is turned on automatically during night. Is it normal?

    What is wrong with my car? It is a 2007 Corolla S. Do I need to go to the Toyota service center to check it out?Why cannot I switch or close the headlight when driving my Corolla?an 07 model car might still have a warranty left.



    good luck

    How do I change my own headlight and what tools do I need?

    I am sick of waiting on people to do it for me. What tools do I need and how should I go about doing it. I heard that if I touch a headlight with my hands, the grease can make it explode, is that true?How do I change my own headlight and what tools do I need?It depends on what kind of lighting system you have. The older sealed beam types you replace the whole lamp assembly. There is either a round or square chrome retaining ring around the headlight with 3 or 4 phillips head screws that must be removed from the front. Usually not too difficult but on some vehicles you may have to remove some of the grill work to get to them. Just be sure you don't mess with the 2 adjuster screws, (Top and Side) On the newer style where only the bulb is replaced, you have to remove them from the backside. There should be a locking plastic collar that has to be twisted to the left until it releases. You should then be able to pull the bulb and connecting wires straight back and remove the wires from the bulb. The bulb is held in place by a rubber O-ring and may take a little effort to remove. You then push the new bulb into the socket making sure the flat part of the electrical connector is facing up. You should feel it click into place. Replace the plastic retaining ring and plug the wire back into it. Changing the bulb itself is not that difficult but getting to them can be. It's not uncommon to have to remove your battery or air intake to gain access. As for touching the bulb, it probably won't make it explode but the oils from your skin will make a %26quot;hot spot%26quot; and cause it to burn out prematurely. Don't touch it with bare skin. Use gloves if need be.How do I change my own headlight and what tools do I need?should only need a screwdriver, just take the outside bracket off and go from thereHow do I change my own headlight and what tools do I need?they do say that, but after 20 years of changing head lights its never happend!How do I change my own headlight and what tools do I need?http://autorepair.about.com/cs/troublesh



    First raise your hood and see if you can grasp the base of the bulb where the wire connector plugs into it. If you can't get your hand in there and have enough strength to remove the connector and twist the bulb out, then sometimes the battery or other obstruction has to be removed to get at the bulb.How do I change my own headlight and what tools do I need?Do not touch the glass part of the bulb, this could make a hotspot and the bulb cold blow.

    Normally the bulb is replaced from behind and quite often no tools are required.

    How do I fix the loose headlight wiring problem in my 2000 Jetta?

    I just bought a jetta not to long ago so far the radio won't work (least of my problems right now) and one headlight won't stay on. If I fiddle around with it comes on but it will randomly go out. It's definatly bad wiring but can I just buy a new *(thing that connects to the bulb) or what?How do I fix the loose headlight wiring problem in my 2000 Jetta?The 3 pin headlamp connectors are available from good auto shops. There are 2 types, one where you cut off the old one and connect the terminals which then push into the new holder (this one really needs soldering to get a permanent connection). The second is where the new one comes with about 6 inches of cable you cut off the old one and join the wires. Make sure, whichever one you chose, you do them one wire at a time so as you do not connect it up wrong. You will probably need to replace the headlamp bulb at the same time as when they get a bad connection they heat up and cook damaging both the connector and the buld. For the price of a bulb it is not worth chancing it..How do I fix the loose headlight wiring problem in my 2000 Jetta?You can get a new connector plug from VW (it will probably shock you when you hear the price) or you can pick up one at an auto recyvler for a fraction of the cost.

    How do you change a headlight for a 04 chevy classic?

    I have a 2004 Chevy classic that i am haveing problems figureing out how to change the headlight on. If anyone can please help me I would appreciate it.How do you change a headlight for a 04 chevy classic?Stupid answer---but look in the owner's manual and it will tell you exactly how to change it and what lights to buy. That is what I had to do with my new Chevy and I am glad it was there. Or just go to Auto Zone, but the light, and ask one of the guys there is they can come out and help you. They always do.How do you change a headlight for a 04 chevy classic?See your chevy dealerHow do you change a headlight for a 04 chevy classic?Open the hood, and look where the back of the headlight is, the bulb can be removed easily from the back of the headlight, put a new one in, and off you go.

    Need to remove and replace headlight assembly 2001 Buick LeSabre. How do you do it?

    I want to replace one of the headlight assemblies (passenger side) which is slightly cracked on the inside. I would like to know from anyone who has removed and replaced this part what is involved. Thanks!Need to remove and replace headlight assembly 2001 Buick LeSabre. How do you do it?spend 15 bucks and get a haynes manual from autozone. it will show you how. many vehicles require you to remove the bumper. i have done it on my accord. some unexpected bolts so the haynes manual is very useful. buy the part on ebay/online as auto stores and dealers will rip you off.Need to remove and replace headlight assembly 2001 Buick LeSabre. How do you do it?it's not to hard on new vehicles there is either tabs to hold it in usually white or screws which may require specialty tools found at ur local parts store.Need to remove and replace headlight assembly 2001 Buick LeSabre. How do you do it?well lets see. higher a plumber or two blondes.
  • What are duvet covers
  • spiritual and life advice
  • How do you remove the headlight assembly in a Lucerne?

    I need to remove the headlight assembly to replace a bulb, but after removing two upper bolts and one lower bolt, the thing seems immovable. Is there another bolt I can not see? Any help would be appreciated. There is nothing in the manual to tell how to do this.How do you remove the headlight assembly in a Lucerne?99 percent of all vehicles do not require the removal of the headlight to replace the bulb.....instead you remove what is blocking the bulb from the backside and then replace the bulb.......

    How do you replace the headlight unit on a 96 ford contour?

    The headlight unit is cracked and I'm trying to replace the whole thing but I don't know where to start to remove the old one.How do you replace the headlight unit on a 96 ford contour?Well, take a look at the new assembly.



    Have a look at where the bolt holes are and locate them on the old headlight assembly.



    You may need to remove the bumper, or disconnect it on one side to get to them all properly.



    Take your time, and dont rush into it.How do you replace the headlight unit on a 96 ford contour?get a chevy

    How do you remove a headlight to clean the case?

    I have a '98 Toyota Corolla and it has pretty %26quot;foggy%26quot; headlight cases. I need to clean it. How do I get the case out to do that?How do you remove a headlight to clean the case?it's probably a sealed unit and doesn't come apart if it's like most new vehicles.How do you remove a headlight to clean the case?http://www.permatex.com/products/automotHow do you remove a headlight to clean the case?I'm not certain about your specific case but most headlights are %26quot;sealed%26quot; enclosures. Except of course for the little hole in the back where you replace the bulb.



    Is it really on the inside? Or possibly just scrathed and pitted and yellowed on the outside? My lights have the same problem. It's on the outside however and I I can hardly see out of them. I kow there are plastic polish's out there but I haven't tried any yet. Good Luck!How do you remove a headlight to clean the case?If its foggy then its either on the outside, most likely. Or its moisture on the inside.



    Plastic polishes help with foggy lenses but the only way to cure the problem is to buy new headlight housings. You can get some nice aftermarket headlights on eBay for cheap.



    If its moisture on the inside then you will need to remove the bulbs. Position the car so that the sun is directly hitting the lights. Now take one of those moister absorbers out of a medicine bottle and tape a string to it. Insert it into the headlight housing and it will absorb the moisture.How do you remove a headlight to clean the case?unscrew it with a screwdriver. Look under the hood behind the lights.....

    How do you open the headlight cover on a 2001 Pontiac Sunfire?

    My headlight is out and I need to change it, yet opening the cover is baffling me to no end. It's probably fairly simple.How do you open the headlight cover on a 2001 Pontiac Sunfire?It probably doesn't %26quot;open%26quot; at all. I'm sure you have to pop the hood go in from behind it. You'll find a round black thing that you usually have to turn just 180 degrees and it will pull right out. You can then unscrew the bulb and put the new one in, and there you go. :) Simple as that.How do you open the headlight cover on a 2001 Pontiac Sunfire?the cover doesn't come off, the light has to be replaced from the back of the headlight, you might have to partially pull the complete light assembly out to get to the bulb.

    How do I get my headlight covers clear again?

    The headlight covers are foggy looken from age I guess. Is there anything out there to use to make them look like new again with out buying new ones?How do I get my headlight covers clear again?the fog is on the outside of the lens believe it or not.car lots do this. sand outside of lens with 800 grit sand paper until all covered then wipe with dry rag follow with 1200 or 1500 grit sand paper in same manner wipe with dry rag. then hand rub with a rubbing compound and wah-la clear and spotless as if right off the lot. check your auto parts store some have a kit with everything listed here for thisHow do I get my headlight covers clear again?Thank you Trevor s for your help. High-Five~

    I come to really enjoy this program that Yahoo has came up with. My friend will be very happy to hear my results I found for her.



    Thanks to all who answered my question.:)

    Report Abuse

    How do I get my headlight covers clear again?I've seen on diy places you can remove the head light and put it in a toaster oven for a few min and then the glue holding it together will melt so you can pull it apart to clean then reheat and stick back togetherHow do I get my headlight covers clear again?If you mean your headlight casings, then it's probably the inside. You can bring them to a headlight technician so he can take them apart and clean the inside, or you can try taking the casings apart yourself by using a heat gun to melt the sealer, and then sealing them back together yourself once you're done cleaning them. I recommend the headlight technician though, seeing as they can warrantee them not fogging up again. Don't buy replacement headlights because they're expensive.How do I get my headlight covers clear again?take a rag and put brake fluid on it then polish the lenses. only the plastic!How do I get my headlight covers clear again?Plexiglass that has become foggy looking is often caused by mini-scratches, swirl marks. Try lemon pledge, it's cheaper than other products and might just do the trick. Spray on and buff.How do I get my headlight covers clear again?This is a tried and proven way to clear the yellowing or fogging of headlights.



    1. Wet sand (water and sandpaper) with 1500-2000 grit sandpaper.



    2. Apply a good quality name brand polishing compound.



    3. Buff out the minute scratches you applied wet sanding with a terry towel. (Takes around 30-45 minutes a headlight or 5-10 minutes with a power buffer)



    4. Stand back and admire your work and the money you just saved doing the work yourself.



    Most auto parts stores sell a polishing kit exactly for this problem. But if you buy the pieces separate then you'll probably save more money in the long run.



    Good luck!!!
  • what in your opinion is bes c ide and
  • Cats
  • How do you replace the headlight bulb in 03 Chevy Tracker?

    The back of the headlight does not screw or pop off, it has a rubber cover. I figured out how to unplug the wires, just need to take out the old bulb and put in the new.How do you replace the headlight bulb in 03 Chevy Tracker?The halogen bulbs are push in. Check for a spring clip at the base of the bulb that locks it in.

    How do you remove the headlight switch on a 1996 Buick Park Avenue?

    We are having problems with the dash lights and tail lights and were told that it may be the headlight/parklight switch. We need to know how to get it out to check it.How do you remove the headlight switch on a 1996 Buick Park Avenue?IU think those are the ones that over heat and melt the switch, connector, and wires....Isn't it kind of like a cockpit style dash where you have controls on either side of the speedo dash area. and the light switch is on the right or left of that? It has been so long......Dude, I cannot remember. My mustang had a similar prob. Not that that matters now... If it is what I am thinking of, I thought there was a phiulips screw underneath that screwed up into it.

    If it is on the column, then you have to take the stearing wheel off, and you need special tools for getting the knuckle and other pieces parts apart too.

    Lol, I know this was no help....sorry I was rambling just hoping I could remember, but I can'tHow do you remove the headlight switch on a 1996 Buick Park Avenue?use a screwdriver.How do you remove the headlight switch on a 1996 Buick Park Avenue?ello

    How much will a headlight replacement at Pep Boys likely be?

    I'm trying to do my own fiscal budget, and I need to figure out what it will cost to have my car's left headlight replaced. Any guesses? It's a 2000 Nissan Sentra.How much will a headlight replacement at Pep Boys likely be?i called pep boys its 22,ooHow much will a headlight replacement at Pep Boys likely be?it will be less than $30, more likely around $15, depending on the type of bulb you get. Sometimes they are under $10.....it varies...How much will a headlight replacement at Pep Boys likely be?That cost is easily gotten by calling pep boys. Shouldn't be more than $15. What I really wanted to say to you is, you should get both lights on each side, at the same time. They will then continue to go out simultaneously throughout its life span. This is a fact.How much will a headlight replacement at Pep Boys likely be?I would guess about 20 or 30 bucks.

    How to change the headlight cover on 2004 Mazda 3?

    I need to replace the headlight covers on my Mazda and I don't want to take it to the dealer. I am not sure how easy or hard it will be and I just wanted to find out if anyone had some tips for me. Thanks.How to change the headlight cover on 2004 Mazda 3?headlight cover?



    the only thing on the headlight that you can remove is the bulb, and for remove the bulb you have to remove a black rubber thing



    those are the only things you can remove on the headlight any thing else will be the complete headlight

    How to replace the headlight fuse on a 2003 Hyundai Elantra?

    I'm trying to replace the left headlight fuse on my Hyundai Elantra, but all I get when I search online is referrals to other places. I've tried Hyundai Forums, but it won't let me register or log in.



    Could someone please give me instructions on how to do it?How to replace the headlight fuse on a 2003 Hyundai Elantra?In most cars the headlights are fused together in other words if the fuse burns out the headlights go out. If one light is out you need to check the bulb not the fuse.How to replace the headlight fuse on a 2003 Hyundai Elantra?There are 2 fuse boxes. One is on the side of the dash on the driver's side. The part you can see when the door is opened. The other is under the hood on the drivers side. It will have a flat black cover the you just press the release tabs on and pull off. Each has a diagram on the cover telling you what each fuse is for.How to replace the headlight fuse on a 2003 Hyundai Elantra?open fuse panal...look for fuse marked lights or headlites...pull it out and look at it....bigger Q is why do you think its a fuse and more import is why would it blow outHow to replace the headlight fuse on a 2003 Hyundai Elantra?keep it simple. Locate the fuse marked headlamp, pull it, replace it and be done w/ it. Diving in any further will be confusing at best unless you have a distinct knowledge of automotive electrical systemsHow to replace the headlight fuse on a 2003 Hyundai Elantra?Anthony has a handle on it. Usually the lamps are fused together. If you have replaced the lamp then it may be a problem with the socket or the feed to the socket. In that case you will need to use a test meter to check for voltage.How to replace the headlight fuse on a 2003 Hyundai Elantra?The 03 elantra was produced with a headlamp relay instead of a fuse. They are a little more expensive than a fuse but are supposed to last longer. The relay you are looking for should be under the hood in a rectangular black box. If it is not there, there should be another fuse panel under the dash either on the drivers side or the passenger side foot well. Good luck!
  • internet really slow
  • make printer work
  • How do you change headlight bulb in a mercury milan?

    Would the headlight need to be removed? If so does the bumper have to come off for this process?How do you change headlight bulb in a mercury milan?In most cases, the headlight does not need to be removed, but it depends on the year and model. Look under the hood at the back of the headlights and you should see a wire going into the back of the headlight.



    In most cases, you can twist the plastic base that the wire is attached to and remove the bulb.

    What is the easiest way to remove headlight oxidation?

    There are a lot of ways to confront the problem of headlight oxidation. whats the safest and easiest method, and how much time does it take from start to finish?



    P.S. My headlights are plastic not glass so toothpaste won't work and using any kind of sandpaper wet or dry of any grit on my projector lens is completely out of the question.What is the easiest way to remove headlight oxidation?Pittman's Original One Step ALR will remove all oxidation on contact. Its the best option for safe, fast oxidation removal on plastic headlights.

    Its both pure liquid and non abrasive.What is the easiest way to remove headlight oxidation?go to your parts retail store and go to the car wax aisle=look for McQUIRES PLASTIC RESTORER comes in a white plastic bottle and i just used it last week==rub it on = rub it off==unbelievable-took less than 5 minutes per lens and they look like new and i think it was under $10

    What is the easiest way to remove headlight oxidation?Use a plastic polish and a soft lint free cloth. If it's on the inside you'll have to remove the headlight assembly and remove the retention clips and do the same thing.What is the easiest way to remove headlight oxidation?go to your local car part store. many of them sell kits for removing the oxidation from plastic headlight covers.What is the easiest way to remove headlight oxidation?The easiest way is to have someone else do it. As for the method, tell them %26quot;surprise me.%26quot;What is the easiest way to remove headlight oxidation?I would just replace them the plastic. I hate headlight oxidation!What is the easiest way to remove headlight oxidation?Use an acrylic lens deoxidizer. That will clear them up in seconds.

    How do you change headlight bulbs on a 2005 Chrysler Pacifica?

    The headlight module is difficult to remove. It looks simple in the owners manual. Help!How do you change headlight bulbs on a 2005 Chrysler Pacifica?http://www.ehow.com/how_2630_replace-car



    http://autorepair.about.com/cs/troubleshHow do you change headlight bulbs on a 2005 Chrysler Pacifica?bobweb did your friend vote for you? On a 2005 Pacifica the whole headlight has to come out of the front before you can get at the bulb.

    Report Abuse

    How do you change headlight bulbs on a 2005 Chrysler Pacifica?There actually not that difficult to do, if your concerned dont do it. But if you just take your time reach in there and turn the clip counter clockwise a 1/4 turn it will unlock and slide right out.

    How do I change a headlight bulb on a 1997 Oldsmobile Cutlass?

    I am trying to help a friend of mine change his headlight bulb (just the bulb, not the whole assembly). He has a 1997 Olds Cutlass, and we're not sure how to gain access to the bulb. The headlight assembly has metal plates behind it, so we don't have direct access to the bulb. I've never come across a vehicle that doesn't offere easy direct access to the bulb. I'm thinking we're going to have to pull the whole headlight assembly forward in order to get to the bulb, but we're not exactly sure how.



    Come to think of it, this also brings up the question: How many automotive novices does it take to change a headlight bulb?



    Thanks.How do I change a headlight bulb on a 1997 Oldsmobile Cutlass?On this car there is a bulkhead behind the headlight assembly which prohibits normal access to the bulbs. You need to remove the assembly from the front to get at the bulbs.



    This is actually pretty easy and should be described in your owners manual. If you don't have that just look for two plastic tabs that push down from the top to secure the headlight assembly in place. Pull those up and the whole thing should slide right out. Then just reach for the bulb, give it a little turn and pull it out.How do I change a headlight bulb on a 1997 Oldsmobile Cutlass?Try going to AutoZone.com...they have online repair manuals for free on their website. Good Luck!

    How do I replace a headlight for a 1992 Ford Escort?

    How do I remove the old headlight and install a new one? I can remove the plug-in connection but I can not remove the bulb. Do I have to remove the headlight housing? I have both headlight replacement bulbs but, I am a student and can't afford a mechanic to do it for me. I hope to get the light replaced before I get a ticket for a burned-out headlight. Any suggestions?How do I replace a headlight for a 1992 Ford Escort?Replace the bulbs from the back, inside the engine compartment.How do I replace a headlight for a 1992 Ford Escort?My dad hit a deer and we replaced the head light on a '97 escort and it was crazy. You had to take the whole front facil (bumper) off. Look for screws in the wheel well and inside the hood. Im not sure how a 1992 one is.
  • hide myspace song
  • good conversation with
  • How do I change a headlight bulb on a 1997 Oldsmobile Cutlass?

    I am trying to help a friend of mine change his headlight bulb (just the bulb, not the whole assembly). He has a 1997 Olds Cutlass, and we're not sure how to gain access to the bulb. The headlight assembly has metal plates behind it, so we don't have direct access to the bulb. I've never come across a vehicle that doesn't offere easy direct access to the bulb. I'm thinking we're going to have to pull the whole headlight assembly forward in order to get to the bulb, but we're not exactly sure how.



    Come to think of it, this also brings up the question: How many automotive novices does it take to change a headlight bulb?



    Thanks.How do I change a headlight bulb on a 1997 Oldsmobile Cutlass?On this car there is a bulkhead behind the headlight assembly which prohibits normal access to the bulbs. You need to remove the assembly from the front to get at the bulbs.



    This is actually pretty easy and should be described in your owners manual. If you don't have that just look for two plastic tabs that push down from the top to secure the headlight assembly in place. Pull those up and the whole thing should slide right out. Then just reach for the bulb, give it a little turn and pull it out.How do I change a headlight bulb on a 1997 Oldsmobile Cutlass?Try going to AutoZone.com...they have online repair manuals for free on their website. Good Luck!

    How do I replace a headlight for a 1992 Ford Escort?

    How do I remove the old headlight and install a new one? I can remove the plug-in connection but I can not remove the bulb. Do I have to remove the headlight housing? I have both headlight replacement bulbs but, I am a student and can't afford a mechanic to do it for me. I hope to get the light replaced before I get a ticket for a burned-out headlight. Any suggestions?How do I replace a headlight for a 1992 Ford Escort?Replace the bulbs from the back, inside the engine compartment.How do I replace a headlight for a 1992 Ford Escort?My dad hit a deer and we replaced the head light on a '97 escort and it was crazy. You had to take the whole front facil (bumper) off. Look for screws in the wheel well and inside the hood. Im not sure how a 1992 one is.

    How hard is it to change headlight switch on a 77 corvette?

    My 77 vette panel lights wont come on and the over head light wont come on either. I imagine its the headlight switch. Ive checked the fuses and the headlights still work. Any help?How hard is it to change headlight switch on a 77 corvette?I would imagine the switch knob can be pulled out by pushing a release button on top of the light switch controller. It's just behind the dash. You'll have to reach up and find it.



    Once the handle AND SHAFT pull out, you can then remove the retaining knob from the front of the dash where the handle and shaft came out.



    After you unscrew the retaining knob, the light switch unit should come right out. Carefully unplug the wire harness.



    To install the new one, just repeat the steps in reverse. NOTE: You can push the knob and shaft back in without having to push the release button. The shaft will automatically lock in.How hard is it to change headlight switch on a 77 corvette?http://www.automotiveforums.com/f111-corvette.html

    How do you change the headlight bulbs on a 97 cavalier?

    I cant seem to find a way to get at the back side of the headlights to switch the bulb... Do i need to take out the whole headlight assembly? If I do how do i do that?How do you change the headlight bulbs on a 97 cavalier?The headlamp assemby does need to be removed. There may be some plastic wing nuts on top or they may be the 10mm bolts.

    They are usually on the metal cross member behind the head lamps. Then the bulb is just a twist to the left and pull. There may also be a small plastic lock tab preventing the bulb socket to turn.

    How do you manually turn off the headlights on a 2005 Chevy Impala?

    I have a 2005 Impala (Base) My family and I want to go to a drive in movie theater tonight, but Im not sure how to turn off my headlights, without turning off my car. They come on automatically when its dark.



    In my last car, we could push in the ebrake and it would turn the lights off but it doesn't seem to work on this car.



    I appreciate your help!How do you manually turn off the headlights on a 2005 Chevy Impala?try turning the car off then set the brake and turn the car back on. thats how it works on my camaro.How do you manually turn off the headlights on a 2005 Chevy Impala?carry a small flashlight with u and pull the plugs off the back of both lights,simplest way I know 4 u 2 do it.How do you manually turn off the headlights on a 2005 Chevy Impala?Dave on the impalas equipped with the auto headlamp system to bypass the auto headlamps manually turn on the park lamps.By manually turning on the park lamps it over rides the auto system.Best of luck.
  • big hair
  • Two comforters in the duvet
  • How do you clean inside a car headlight?

    I have a 2002 Toyota Camry and the headlights have this filmy look to them. I've tried washing the outside, but the filmy part is on the inside. Do I have to take the headlight apart to clean it or are there easier ways short of buying a new headlight? It's not hindering my driving (although some would argue that point lol) it's just annoying me a bit.How do you clean inside a car headlight?sounds like oxidation my sisters car 02 camry had that i bought this special polish and a ball like buffer that you put on a high speed drill and left them like new.i purchased it from a matco tool dealer but i think autozone or kragens may have it.How do you clean inside a car headlight?you cannot pop out your head light and clean it you can go to the nearest automotive repair shop and ask for them to change your lights don't try to take it off by yourself you might break it let a professional do itHow do you clean inside a car headlight?go to auto value or to a auto parts place and they have a kit to wash your headlights. P.s. the inside of the headlight is very sensitive to any thing put in it. Don't let your friends tell you to wash out the headlight. if there is a problem it will be the outside not the inside.How do you clean inside a car headlight?If you're comfortable taking the whole headlight assembly off, you can remove the bulb (do not touch the glass with your fingers) and then clean inside the headlight by squirting water in the hole where the bulb used to be and shaking it all over the place. Like cleaning out a flower vase.



    Let it dry for a long time.



    Water can get inside headlight assemblies and make the film you seem to be talking about. Or the polycarbonate material might have degraded. Or maybe there's damage from sand and bugs and whatnot?How do you clean inside a car headlight?It probably is not on the inside of your lamp but is the plastic that lamp is made out of turning colors due to the sun and pollution, they get foggy and yellow. You can repair it while it is still on the vehicle but I recommend taping off around the hood and fender %26amp; bumper and putting some newspaper off of the tape to protect the rest of your car. You can get a kit from a local auto parts store that has a cleaner/polish as step one and then a sealer as step 2. Some body shops can do this also for a relatively inexpensive fee so it might be worth picking up the phone and calling a couple to see if they do it and how much it would be. It won't hurt your lamps if you leave it alone, it just doesn't produce as much light as when they where new.

    How do I choose headlight bulbs for my car?

    I want to get a new pair of headlight bulbs for my car. Are yellow headlights street legal? What factors do I have to consider when getting headlight bulbs? How do I choose headlight bulbs for my car?Legality of different colors will depend on the state laws. It is legal here in Oregon. Yellow bulbs also emit the best light. The bluer the light the less distance the light travels.

    How much do you think it would cost me to get this car running and looking nice again?

    http://s844.photobucket.com/albums/ab6/T



    93' Volvo 850 GLT





    It has these problems with it:

    Has the wrong fuel pump in it

    Bad front axel

    Door Panel Ripped off (I hate people)

    Headlight wipers ripped off

    The stuff on the ceiling (not the actual ceiling) ripped off

    AC/Heater doesn't work

    Dents and bad paint job

    Doesn't idle (I think it's only the fuel pump)

    Broken glove box



    I just got it too days ago, for the best price! Free. My Mommy gave it to me. ;)



    How much would it cost me to take in to a Volvo mechanic and get it fixed?

    If I know how to do it myself (I am pretty sure my uncle can fix it) how much would all the parts be?



    Thanks!How much do you think it would cost me to get this car running and looking nice again?I had a hole in my ac fixed and it alone cost $650 alone. I think you are easily looking at $2500 in problems you listed and probably another $500 in things you dont know are wrong (things like motor mounts, warped breaks, etc...).It would be cheaper just to buy another car.How much do you think it would cost me to get this car running and looking nice again?i'd say a fair bit. At least 1000. The AC/Heater problem could well be a big job itself depending on what part of the whole system is broken. In my car the air was not being compressed because the compression box thingy had sheared off. It'll cost me 700 pounds to fix. Just to give you an idea...



    EDIT: The battery alone can cost 200-400.How much do you think it would cost me to get this car running and looking nice again?If you check KBB.com or Edmunds.com or NADA.com or.... I think you will find that a 93 Volvo 850 in outstanding condition: everything works perfectly, no body damage, spotless interior, is worth $1,500 at most.



    In short, it's not worth fixing.How much do you think it would cost me to get this car running and looking nice again?Well like most people would say its not worth putting alot of money into the car. Unless you just want a project car. You mine as well customize the car if ya going to do that much repairs...

    How to replace headlight assembly on 1995 Maxima?

    It looks very complicated. I don't want to break anything. I've looked everywhere, but I don't know what I need to take apart. Thanks.

    How to open a maxima headlight?

    Is there anyway to open 97 Nissan Maxima headlight? There are some pebbles or something in there i want to remove but not sure how to access it. My car is the SE model
  • makeweeksofschoolgobyfaster
  • low cost web hosting
  •