One of the ilumination rings around the projector headlight does not work,but the light does how do i fix it?

i bought a 98 honda civic with aftermarket projector lights, the lowbeam headlight works on the passenger side also the high beam works as well but the illumination ring around the lights itself does not turn on at all but the other one on the drivers side is ok. how do i fix this problem? is there a bulb to this ring because i cannot enter the headlight itself because it is factory sealed how would i replace it?One of the ilumination rings around the projector headlight does not work,but the light does how do i fix it?there is a bulb for the ring I believe it is an h3 halogen type you can find it next to the off road driving lights at your local kragen schucks checker or autozoneOne of the ilumination rings around the projector headlight does not work,but the light does how do i fix it?If possible look for a manufacturer code or name on the outer housing of the headlight. Contact them to see if they can recommend a repair. Otherwise I would check to see if you can find a break in the wiring circuit. If no abrasions are found in the wiring, check to see if the illumination ring is made of LED's. If so its possible the wiring inside the headlight may have a broken wire causing that side not to work. This means you might have to disassemble the light to repair and I would only suggest the manufacturer do so otherwise you could damage the light beyond repair. Many times these are factory sealed and cannot be opened up and reassembled, as you already know.